NOTE: When using a cold process repairing method it is
recommended to seal your repairs with Flexible Super Sealer.
This will help blend and seal in your repair method of choice.
PADDED DASH FILL (2050-9) - Formulated from special
polyester resins that increases adhesion and flexibility while
repairing vinyl and other plastic substrates. (Arm rests,
console covers, dashes and bumpers.) It has excellent filling
qualities which allows shaping, sanding and feathering of
your edges. This product is also used as a top coat over other
cold type repair processes.
FLEX FILLER 2 (2000-T) - A two part, flexible fast
curing epoxy putty used for repairing tears, punctures, and
gouges in flexible parts.
This product has superior adhesion and is is easily sandable.
DASH PUTTY POWDER (4909A-4) - This product is mixed
with Liquid Vinyl to form a putty with the viscosity of peanut
butter. It is used to repair minor damage in plastics and
vinyls. It works as a flexible topcoat over large repaired
areas. It is an air dry compound that can be sanded.
LIQUID VINYL (4909-16) - This product is mixed with
DASH PUTTY POWDER to form a putty with the viscosity of peanut
butter. It it used to repair minor damage in plastics and
vinyls. It works as a flexible topcoat over large repaired
areas. It is an air dry compound that can be sanded.
FLEXIBLE SEM WELD II (39708) - Revolutionary formulation
containing adhesion promoters which is designed specifically
for problem plastics. In addition to outstanding adhesion
characteristics, this two part epoxy based compound sands
easily without clogging and virtually will not pinhole. May
be used on most interior and exterior plastics for structural
and non-structural damage.
POLYURETHANE CLEAR ROD (R-1) - Commonly used on bumper
covers, fenders, exterior door panels, filler panels, soft
bezels, etc. These rods are used in conjunction with the 5003TH
Mini-Weld Airless Plastic Welder. The R-1 rod is heated through
the airless welder then flowed in to repair area after the
damages area been V-grooved. Then sand the area carefully
using 80-100 grit sandpaper.
ABS WHITE WELDING ROD (R-3) - Commonly used on grills,
head lamp doors, lower instrument panels, consoles and interior
trim panels. Usage is similar to that of the R-1 rod. Other
Rods available according to types of plastics.
FOREVER BLACK (F/B) - Rejuvenates the finish on bumpers,
wheel wells, moldings, side moldings, mud guards, tires, door
handles, spoilers and mirrors. Permanently recolors and protects
all BLACK plastics, vinyl & rubber surfaces on your car
without silicone. It will not attract dust and also protects
against UV damage.
MICRO BALLOONS (MB) - A brown powdery substance used
in conjunction with cyanoacrylate adhesives to fill in cracks
on hard plastic surfaces. Once you "V" out the crack,
put some adhesive in the bottom of the crack and add micro
balloon until you almost reach the surface. Then top off with
more adhesive, making sure not to get any on your skin. The
chemical reaction between these two products produces a lot
of heat that will case extreme burning. Keep in mind these
adhesives bond instantly to skin. Once you have filled the
crack to surface level use Flex Bond to fill any pinholes
let in your repair. Use Padded Dash Fill if needed.
QUICK FIX (QF) - This epoxy is used for plastic repair.
It can be used on dashes, console covers and bumpers. Just
break off a piece and knead it between you hands until putty
turns all one color. Then mold into repair area and sand until
smooth. Use Padded Dash Fill to feather in edges if needed.
FLEXIBLE BUMPER PATCH (39127) - A moderately flexible
filler designed primarily for cosmetic repairs on urethane
parts. Has outstanding sanding and shaping qualities.
FLEXIBLE POLYESTER PUTTY (39458) - This product is
formulated to be used for small imperfections and as a finish
coat on plastics. It has a smoother texture, great adhesion,
flexible, fast drying time and sands easily.