FLEXIBLE SUPER SEALER (3250) - A unique single component polyester based material that not only seals and fills sand scratches, it also drastically improves paint adhesion on all plastics. Super Sealer is flexible and can be used on both flexible and rigid parts and is an excellent solvent barrier. Note: DO NOT THIN!! THIS PRODUCTS IS READY TO SPRAY RIGHT OUT OF THE CAN!!!
FLEX-ALL 2 (3750) - Flex-All 2 is a flex agent that is added to virtually all paint systems including Urethane, Base Coat Clear Coats, Isocyanate Free Systems, Acrylic Enamel and Acrylic Lacquer. This product will keep your paint flexible to help prevent cracking and peeling. Now one Flex Additive does if all!! This is a highly concentrated form to save you money. Note: Flex-All 2 must be mixed with paint BEFORE adding thinner.
BARRIER COAT (BC) - A thick clear lacquer for vinyl finishes where maximum resistance to plasticizer migration form beneath is desired. Spray over the repair after curing but before coloring. Improves grain ability and hides "flaws" and "halos" in vinyl and plastic repairs.
SAND FREE (3836) - Works as a bonding agent on plastics under color coat. A special blend of solvents softens the substrate promoting adhesion of the material being applied. Also works on difficult to sand areas such as door jams, under hoods and other hard to reach areas.
FLEXIBLE BONDING CLEAR (3986) - Promotes adhesion of top coat materials when repairing or refinishing problem plastics such as Polyethylene. Works equally well on all flexible or rigid plastics and on painted surfaces.
LEATHER SEALER (LS-5) - Leather is a natural product and contains microscopic pores which will soak up liquid similar to wood fibers. It is necessary to seal the leather first with LS5 clear base by spraying on one or more coats so that the surface is soaked up with the LS5 and well sealed prior to applying color. LS5 is also used for restoring the appearance of old leather and for improving its flexibility. Lastly, the LS5 clear base can be used as a base coat or a primer on many other surfaces besides leather, such as wood, metal or plastic before spraying them with color coating. The LS5 gives an excellent bond and acts as an excellent primer for this type of application. You may also spray LS5 over vinyl color coatings to give it a wet look.
BLUSH RETARDER (SBR) - This product is used in your solvent base dyes in hot weather to slow down the drying time and in humid and cold weather to prevent fogging.
WATER BASE HI-TAC PRIMER (WBTP) - A soft flexible clear tacky primer used to adhere your color on difficult Leather (steering wheels, arm rests, furniture) and any other oily surfaces. Spray or wipe on. Let dry and apply color.
WATER BASE PLASTIC PRIMER (PP) - A clear primer used for adhesion on plastics. Can also add color pigment and spray directly on plastics for coloring. Spray or wipe on 1 to 2 coats. Let dry and apply color.