Complete Product Glossary

WATER BASE SPRAY GRAIN (WBSG) - This water base product is a one part spray grain. Used with a Pre Val sprayer this grain creates a fine to medium grain depending on the application rate. Once dried it can be sanded for desired texture. This product works excellent as a blending agent to hide any flaws left in your repair.

CHIP GUARD (3980) - This is an aerosol of texture spray. Protects vulnerable lower panels from chipping and metal corrosion,. Excellent adhesion and extra tough film for ultimate protection. Spray pattern may be varied to match various factory textures.

FLEXIBLE PRIMER SURFACER (3000) - Apply Primer Surfacer on repaired areas, let dry, then sand down till you achieve desired texture. You can build up layers to improve your texture.

FLEX-TEX (3800) - A unique blend of flexible materials designed to be used for retexturing repaired areas on plastics, dashes, vinyls, bumpers and armrests. Apply Flex-Tex on repaired areas, let dry, then sand down till you achieve desired texture.

PLASTIC CLONE (PC) - A two-step process used to duplicate the same grain impression you will need to finish your repair. When you are read to grain, spray a light tack coat over the entire area you are graining. Wait about fifteen to twenty seconds, then spray a wet coat. After making a graining pad with the same texture you will spray your activator on the pad and on the repair area. Then press the pad over the repaired area and hold for about thirty seconds. Now dab off the excess moisture to see the grain. Repeat until desired texture is achieved.

MIRACLE DASH TEXURE "A" (MDTA) - This is the first of a two part process. Spray on repaired area. The heavier the amount sprayed will create a deeper grain. Let dry for 10-30 seconds depending on temperature, then apply....

MIRACLE DASH TEXURE "B" (MDTB) - This is the second of a two part process. After the application of (MDTA) spray this over the repaired area and allow the chemical reaction of both products to create your texture. The heavier the amount sprayed will create a wider grain.

TEXTURE COATING (3985) - This aerosol of texture spray duplicates the original finish on urethane bumpers, instrument panels, dashes, consoles and other textured plastic and vinyl parts. No priming required.

LEATHER CLONE (LC) - A two-step process is used to duplicate the same grain impression you will need to finish your repair. When you are ready to grain, spray a light tack coat over the entire area you are graining, wait about fifteen to twenty seconds then spray a wet coat. Make a graining pad with the same texture. Spray your activator on the pad and on the repaired area, then press the pad over the repair area and hold for about thirty seconds. Now dab off the excess moisture to see the grain. Repeat until you achieve the desired texture.

GRAINING COMPOUND CATALYST (GCC) - This is the catalyst for the graining compound. Use six to eight drops of the catalyst to one ounce of compound.

GRAINING PAD SET (GP-S) - We have compiled a set of fifteen graining pads with the most popular grains embedded in them. These pads have a vinyl backing to help you identify the pattern on the grain and to protect your hands from the heat.

GRAINING PAPERS SET (GPS-6) - A set of 6 different thin papers (3" x 8") with grains to be used with our heat iron to reproduce your grain.

LEATHER FILL (LF) - A water based compound used for small cracks and blemishes. Air cures and is easy to sand.

LEATHER CRACK FILL (LCF) - A solvent based compound used for repairing surface cracks that air drys and sands easily.

LEATHER CREAM FILL (LCR) - A water based compound used to for a smooth skin finish over the repaired area. Apply with a paper towel quickly and let air dry. This will provide a final base from which to texture and color.

LEATHER PRIMER (LP) - This is designed to help adhesion on other compounds if you are having problems with the color not adhering.

LEATHER SMELL CONDITIONER (LSC) - A basic leather conditioner that contains a high leather smell.

LEATHER SOFT FILL (LSF) - Use to fill in any pinholes or minor imperfections. Just a quick swipe with the pallette knife will do, much like using spot putty. Let air dry.

DEEP LEATHER FILL (DLF) - This water base leather compound is used for deeper cracks. It is an air cured compound that needs to be layered, alloying to dry in between coats. Use the other compounds as needed (LF-LSF-LCR) to finish the repair.

LEATHER ADHESIVE (LA) - This should be wiped into any exposed leather fibers such as in frayed areas, slices part way through or where there may be a series of digs in the leather that can be brushed back and laid back down. Do not leave Leather Adhesive on the surface to the original finish. Allow to air dry. Also used as adhesive to secure a subpatch.

LEATHER CLONE (LC) - A two-step process is used to duplicate the same grain impression you will need to finish your repair. When you are ready to grain, spray a light tack coat over the entire area you are graining, wait about fifteen to twenty seconds then spray a wet coat. Make a graining pad with the same texture. Spray your activator on the pad and on the repaired area, then press the pad over the repair area and hold for about thirty seconds. Now dab off the excess moisture to see the grain. Repeat until you achieve the desired texture.

FLEXIBLE URE-WELD (39406) - Two part base compound used to repair large damaged areas. After Ure-Weld dries sand smooth and finish repair with the other leather products as needed.

HEAT CURED LEATHER COMPOUND (LRC-40) - A low temperature heat cured compound used in repairing leather the same way vinyl repair compound is used. You can also use the other leather products to finish off the repair as needed.

LEATHER PENETRATE DYE (LD) - Penetrate dye is used with a clean lint free cloth and wiped on the leather. It is used for complete color changes. An example is if you are dying from white to black. When you apply the dye, it will penetrate into the leather and change the color almost instantly, then spray your color coat over the top.

NOTE: When using a cold process repairing method it is recommended to seal your repairs with Flexible Super Sealer. This will help blend and seal in your repair method of choice.

PADDED DASH FILL (2050-9) - Formulated from special polyester resins that increases adhesion and flexibility while repairing vinyl and other plastic substrates. (Arm rests, console covers, dashes and bumpers.) It has excellent filling qualities which allows shaping, sanding and feathering of your edges. This product is also used as a top coat over other cold type repair processes.

FLEX FILLER 2 (2000-T) - A two part, flexible fast curing epoxy putty used for repairing tears, punctures, and gouges in flexible parts.

This product has superior adhesion and is is easily sandable.

DASH PUTTY POWDER (4909A-4) - This product is mixed with Liquid Vinyl to form a putty with the viscosity of peanut butter. It is used to repair minor damage in plastics and vinyls. It works as a flexible topcoat over large repaired areas. It is an air dry compound that can be sanded.

LIQUID VINYL (4909-16) - This product is mixed with DASH PUTTY POWDER to form a putty with the viscosity of peanut butter. It it used to repair minor damage in plastics and vinyls. It works as a flexible topcoat over large repaired areas. It is an air dry compound that can be sanded.

FLEXIBLE SEM WELD II (39708) - Revolutionary formulation containing adhesion promoters which is designed specifically for problem plastics. In addition to outstanding adhesion characteristics, this two part epoxy based compound sands easily without clogging and virtually will not pinhole. May be used on most interior and exterior plastics for structural and non-structural damage.

POLYURETHANE CLEAR ROD (R-1) - Commonly used on bumper covers, fenders, exterior door panels, filler panels, soft bezels, etc. These rods are used in conjunction with the 5003TH Mini-Weld Airless Plastic Welder. The R-1 rod is heated through the airless welder then flowed in to repair area after the damages area been V-grooved. Then sand the area carefully using 80-100 grit sandpaper.

ABS WHITE WELDING ROD (R-3) - Commonly used on grills, head lamp doors, lower instrument panels, consoles and interior trim panels. Usage is similar to that of the R-1 rod. Other Rods available according to types of plastics.

FOREVER BLACK (F/B) - Rejuvenates the finish on bumpers, wheel wells, moldings, side moldings, mud guards, tires, door handles, spoilers and mirrors. Permanently recolors and protects all BLACK plastics, vinyl & rubber surfaces on your car without silicone. It will not attract dust and also protects against UV damage.

MICRO BALLOONS (MB) - A brown powdery substance used in conjunction with cyanoacrylate adhesives to fill in cracks on hard plastic surfaces. Once you "V" out the crack, put some adhesive in the bottom of the crack and add micro balloon until you almost reach the surface. Then top off with more adhesive, making sure not to get any on your skin. The chemical reaction between these two products produces a lot of heat that will case extreme burning. Keep in mind these adhesives bond instantly to skin. Once you have filled the crack to surface level use Flex Bond to fill any pinholes let in your repair. Use Padded Dash Fill if needed.

QUICK FIX (QF) - This epoxy is used for plastic repair. It can be used on dashes, console covers and bumpers. Just break off a piece and knead it between you hands until putty turns all one color. Then mold into repair area and sand until smooth. Use Padded Dash Fill to feather in edges if needed.

FLEXIBLE BUMPER PATCH (39127) - A moderately flexible filler designed primarily for cosmetic repairs on urethane parts. Has outstanding sanding and shaping qualities.

FLEXIBLE POLYESTER PUTTY (39458) - This product is formulated to be used for small imperfections and as a finish coat on plastics. It has a smoother texture, great adhesion, flexible, fast drying time and sands easily.

FLEXIBLE SUPER SEALER (3250) - A unique single component polyester based material that not only seals and fills sand scratches, it also drastically improves paint adhesion on all plastics. Super Sealer is flexible and can be used on both flexible and rigid parts and is an excellent solvent barrier. Note: DO NOT THIN!! THIS PRODUCTS IS READY TO SPRAY RIGHT OUT OF THE CAN!!!

FLEX-ALL 2 (3750) - Flex-All 2 is a flex agent that is added to virtually all paint systems including Urethane, Base Coat Clear Coats, Isocyanate Free Systems, Acrylic Enamel and Acrylic Lacquer. This product will keep your paint flexible to help prevent cracking and peeling. Now one Flex Additive does if all!! This is a highly concentrated form to save you money. Note: Flex-All 2 must be mixed with paint BEFORE adding thinner.

BARRIER COAT (BC) - A thick clear lacquer for vinyl finishes where maximum resistance to plasticizer migration form beneath is desired. Spray over the repair after curing but before coloring. Improves grain ability and hides "flaws" and "halos" in vinyl and plastic repairs.

SAND FREE (3836) - Works as a bonding agent on plastics under color coat. A special blend of solvents softens the substrate promoting adhesion of the material being applied. Also works on difficult to sand areas such as door jams, under hoods and other hard to reach areas.

FLEXIBLE BONDING CLEAR (3986) - Promotes adhesion of top coat materials when repairing or refinishing problem plastics such as Polyethylene. Works equally well on all flexible or rigid plastics and on painted surfaces.

LEATHER SEALER (LS-5) - Leather is a natural product and contains microscopic pores which will soak up liquid similar to wood fibers. It is necessary to seal the leather first with LS5 clear base by spraying on one or more coats so that the surface is soaked up with the LS5 and well sealed prior to applying color. LS5 is also used for restoring the appearance of old leather and for improving its flexibility. Lastly, the LS5 clear base can be used as a base coat or a primer on many other surfaces besides leather, such as wood, metal or plastic before spraying them with color coating. The LS5 gives an excellent bond and acts as an excellent primer for this type of application. You may also spray LS5 over vinyl color coatings to give it a wet look.

BLUSH RETARDER (SBR) - This product is used in your solvent base dyes in hot weather to slow down the drying time and in humid and cold weather to prevent fogging.

WATER BASE HI-TAC PRIMER (WBTP) - A soft flexible clear tacky primer used to adhere your color on difficult Leather (steering wheels, arm rests, furniture) and any other oily surfaces. Spray or wipe on. Let dry and apply color.

SUPER CLEAN PLASTIC CLEANER (1000) - Does not contain Mineral Spirits! Cleaners that contain Mineral Spirits leave an oily film on the surface and can cause the paint to peel. This cleaner is formulated to remove mold release agents, wax, silicone, tar and other contaminants form painted or unpainted, plastic or metal surfaces.

RED RELIEF (RR) - This is a two part product that combined with terry cloth and steam iron will remove pesky food, koolaid, rust, iodine and mold stains.

WATER BORNE VINYL AND PLASTIC PREP (38464) - Removes mold release agents, fingerprints, grease, wax and other contaminants and leaves vinyls and plastic substrates clean for coating. This product will not soften or distort material and leaves no residue or film.

SILICONE WASH (S100) - This chemical is used to clean all surfaces in preparation for repairing and coloring. Silicone and wax contamination is not visible but is very common. It must be washed off or peeling of paint will result.

SUPERIOR LEATHER PREP (SLP) - A special solvent combination designed to prepare leather for coating with color coat or other leather coatings. Almost all commercial leathers are factory processed with a coating which prevents proper adhesion of the other surface finishes. Leather Prep penetrates this film and removes it to allow proper adhesion of color coat.

VINYL & LEATHER CLEANER (SVC) - Cleans vinyl, leather, Naugahyde, Dacron, nylon and other related fabrics. It is non abrasive and leaves no residue. Keeps vinyl and leather clean, soft and bright. Removes soil, grease and grime from the deepest grains. SVC is non-flammable, water based and odorless for safe environmental applications. Use nylon brush to scrub soils out of the pores in leather.

Z7 VINYL & LEATHER CLEANER (Z7) - Same as above but stronger and should be diluted.

VINYL & PLASTIC PREP SOLVENT (VPPS) - Prepares plastic and vinyl for coloring. Will not leave a residue. Use caution: will distort some fragile vinyls if used in excess.

LEXOL LEATHER CLEANER (LCL) - You can help prevent leather from cracking by using Lexol Cleaner. Deep cleans and foams away dirt and oils that build up on leather.

LEXOL LEATHER CONDITIONER (LCO) - Lexol's unique formula penetrates into wet or dry leather to bond with the leather fibers. Unlike other products, Lexol does not leave a slick or slippery film. Both cleaner and conditioner is adjusted to the pH range of leather itself.

COFFEE STAIN REMOVER (CFSR) - A two part mixture used to remove brown stains. Just spray on and watch the stain foam up and wipe off with a clean moist rag.

VINYLEX PROTECTANT (VP) - A new formula designed to renew vinyl, rubber and plastic. Vinylex with ist DH-60 UV sunscreen protects against fading, cracking and drying caused by age, environmental pollution and the sun. For use on car interiors, vinyl tops, bumpers, tires, luggage and furniture.

CARPET SPOT REMOVER (CSR) - Excellent for removing stains from carpets and upholstery. From car interiors to restaurants as well as homes and apartments, CSR is perfect for many cleaning situations.

ZX5 INK REMOVER (ZX5) - Removes ink from a number of materials including vinyl and cloth.

SEM SOLVE (38374) - This product is a special combination of solvents formulated to simplify cleanup of adhesives, waxes, road tar, grease and paint overspray. It comes ready to use, easy pour spout, leaves no residue and removes contaminants fast.

CLEAR WATER BASE (CWB) - The clear base is designed for high performance uses, where durability, flexibility, chemical and abrasion resistance are required.

PRE-MIXED WATER BASE COLOR (WB/PC) - Non-toxic, non-flammable, quick drying and cleans up with water. Excellent adhesion on vinyl, leather, plastic, fabric and carpet. UV resistant, permanent coating which provides good water, humidity, chemical and solvent resistance properties. Maximum coverage attained using less material.

WATER BASE PIGMENT (WBP) - Pure color pigment that has to be added to Clear Base for spraying purposes. Works the same as above.

WATER BASE FLATNER (WBF) - To be added directly into the water base dyes (5-25%) to dull down the sheen. For those instances where you do not want a lot of shine to the finished dye job.

WATER BASE FLEX AGENT (WBFA) - This product should be added to your water base dyes (5-10%) when you are working on heigh traffic materials. One example is furniture. This material takes a lot of abuse and over all wear and tear. Your dye has to be able to withstand the flexibility of that kind of material. You can also use this product as a sealer to help adhesion.

WATER BASE SLIP AGENT (WBSA) - Use this product directly into your color, clear top coat or velour adhesive (WBA) (2-5%) to soften the feel of your repair and re-coloring job.

• STRIPING
  
• DOOR EDGE MOLDING
  
• GOLD PLATING KITS
  
• CONTAINERS
  
• WINDSHIELD KITS
  
• MASKING PAPER & TAPE
  
• WHEEL REFINISHING SYSTEM
  
• HEADLIGHT RESURFACING KIT
  
• DEODORIZING KITS
  
• WHEEL WELL MOLDINGS
  
• DASHCAPS AND ARMRESTS
  
• CARPET DASH COVERS
  
• BODY SIDE MOLDINGS
  
• EXTERIOR PAINT TOUCH-UP KITS
  
• CARPET COLOR TREATMENT KIT